137,000 products always in stock

AUTO-HAK Towbar detachable incl. electrical set 7pins specific - AUDI A6 Avant

Product number: 170173-09627-1

AUTO-HAK
AUTO-HAK Towbar detachable incl. electrical set 7pins specific

zoom

  • Towbar variant: Towball inserted from the rear
  • Towing capacity: 2500 kg
  • Vertical load: 100 kg
  • Electrical set-model: Data bus
  • suitable for AUDI A6 Avant
  • year of make 05.11 - 11.14

in stock

RRP* 555.-

-30%

388.-

incl. 16% VAT plus shipping costs
* Recommended Retail Price

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • Vehicles up to model year 2013 with Audi PR code "1D8" have a prepared 12x connector, we can check which PR code your vehicle has with the help of the chassis number.
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
Trailer Hitch for vehicles with towbar preparation
Model exclusion RS6
Datasheet towbar complete kit
Manufacturer towbar AUTO-HAK
Towbar type detachable
Towbar lock Lever system
Towbar variant Towball inserted from the rear
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 100 kg
Towing capacity 2.500 kg
D-value 12,60 kN
Ball head lockable not lockable
Certification E20-55R-01 3684
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 19,86 kg
Installation time (in hours) 1) 4,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes
Voltage [V] 12

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • Vehicles up to model year 2013 with Audi PR code "1D8" have a prepared 12x connector, we can check which PR code your vehicle has with the help of the chassis number.
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
Trailer Hitch for vehicles with towbar preparation
Model exclusion RS6
Datasheet towbar complete kit
Manufacturer towbar AUTO-HAK
Towbar type detachable
Towbar lock Lever system
Towbar variant Towball inserted from the rear
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 100 kg
Towing capacity 2.500 kg
D-value 12,60 kN
Ball head lockable not lockable
Certification E20-55R-01 3684
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 19,86 kg
Installation time (in hours) 1) 4,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes
Voltage [V] 12

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.


Product details

Complete detachable towbar set with 7-pin electrical kit for your selected vehicle AUDI A6 Avant

You will be perfectly equipped for all challenges with this complete set, comprising a detachable towbar from AUTO-HAK and the necessary 7-pin electrical kit. The towbar and electrical kit were developed specifically for your AUDI A6 Avant. You can tow trailers weighing up to 2500 kg with them. When not in use, the ball head can be simply removed and stored in the boot.

It is not necessary to subject your AUDI A6 Avant to an expert inspection or to make an entry in your vehicle documentation. The instructions in your vehicle user manual, issued by the vehicle manufacturer, must be complied with.

This complete set provides you with everything, from the smallest screw to the installation instructions, required to mount a towbar on your AUDI A6 Avant.

scroll to start of page

matching accessory for AUTO-HAK Towbar detachable incl. electrical set 7pins specific (1)

Rameder uses cookies to provide you with the best possible service. If you continue to surf the online shop, you agree to the use of cookies. Learn more in the privacy policy.

OK, I agree