137,000 products always in stock

AUTO-HAK Towbar rigid incl. electrical set 7pins specific - AUDI A6 Avant

Product number: 170171-09627-1

AUTO-HAK
AUTO-HAK Towbar rigid incl. electrical set 7pins specific

zoom

  • Towbar variant: with screwed-on ball head
  • Towing capacity: 2500 kg
  • Vertical load: 100 kg
  • Electrical set-model: Data bus
  • suitable for AUDI A6 Avant
  • year of make 05.11 - 11.14

in stock

RRP* 412.-

-29%

289.-

incl. 19% VAT plus shipping costs
* Recommended Retail Price

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • Vehicles up to model year 2013 with Audi PR code "1D8" have a prepared 12x connector, we can check which PR code your vehicle has with the help of the chassis number.
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
Trailer Hitch for vehicles with towbar preparation
Model exclusion RS6
Datasheet towbar complete kit
Manufacturer towbar AUTO-HAK
Towbar type rigid
Towbar variant with screwed-on ball head
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 100 kg
Towing capacity 2.500 kg
D-value 12,60 kN
Certification E20-55R-01 3686
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 18,36 kg
Installation time (in hours) 1) 4,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • Vehicles up to model year 2013 with Audi PR code "1D8" have a prepared 12x connector, we can check which PR code your vehicle has with the help of the chassis number.
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
Trailer Hitch for vehicles with towbar preparation
Model exclusion RS6
Datasheet towbar complete kit
Manufacturer towbar AUTO-HAK
Towbar type rigid
Towbar variant with screwed-on ball head
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 100 kg
Towing capacity 2.500 kg
D-value 12,60 kN
Certification E20-55R-01 3686
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 18,36 kg
Installation time (in hours) 1) 4,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.


Product details

Complete rigid towbar set with 7-pin electrical kit for your selected vehicle AUDI A6 Avant

You will be perfectly equipped for all challenges with this complete set, comprising a rigid towbar by AUTO-HAK and the necessary 7-pin electrical kit. The electrical kit and towbar were developed specifically for your AUDI A6 Avant. Trailers with a weight of up to 2500 kg can be towed with them.

It is not necessary to subject your AUDI A6 Avant to an expert inspection or to make an entry in your vehicle documentation. Please note the instructions of the vehicle manufacturer in your vehicle user manual. Your car's parking assistance sensors might detect the tow ball of this rigid towbar. If the ball head is in the detection area, it will be seen as an obstacle when reversing. We recommend fitting a detachable towbar in vehicles with parking sensors.

This complete set provides you with everything you need, from the smallest screw to the installation instructions, to install the towbar on your AUDI A6 Avant.

scroll to start of page

matching accessory for AUTO-HAK Towbar rigid incl. electrical set 7pins specific (1)

BF_COOKIE_NOTE

BF_OK