137,000 products always in stock

Brink Towbar detachable incl. electrical set 7pins specific - AUDI A7 Sportback

Product number: 149276-08986-1

Brink
Brink Towbar detachable incl. electrical set 7pins specific

zoom

  • Towbar variant: Towball inserted from below
  • Towing capacity: 2500 kg
  • Vertical load: 100 kg
  • Electrical set-model: Data bus
  • suitable for AUDI A7 Sportback
  • year of make 10.10 - 05.18

in stock

RRP* 586.-

-25%

435.-

incl. 16% VAT plus shipping costs
* Recommended Retail Price

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • this wiring harness kit was developed for vehicles with no pre-equipment, but can also be used on vehicles with the 12-pin connector
Trailer Hitch for vehicles without towbar preparation
Model exclusion RS7
Datasheet towbar complete kit
Manufacturer towbar Brink
Towbar type detachable
Towbar lock Automatic
Towbar variant Towball inserted from below
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 100 kg
Towing capacity 2.500 kg
D-value 12,60 kN
Ball head lockable lockable
Certification E11*R55*01*8479
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 23,15 kg
Installation time (in hours) 1) 3,5 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes
Voltage [V] 12

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • this wiring harness kit was developed for vehicles with no pre-equipment, but can also be used on vehicles with the 12-pin connector
Trailer Hitch for vehicles without towbar preparation
Model exclusion RS7
Datasheet towbar complete kit
Manufacturer towbar Brink
Towbar type detachable
Towbar lock Automatic
Towbar variant Towball inserted from below
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 100 kg
Towing capacity 2.500 kg
D-value 12,60 kN
Ball head lockable lockable
Certification E11*R55*01*8479
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 23,15 kg
Installation time (in hours) 1) 3,5 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes
Voltage [V] 12

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.


Product details

Complete detachable towbar set with 7-pin electrical kit for your selected vehicle AUDI A7 Sportback

You will be perfectly equipped for all challenges with this complete set, comprising a detachable towbar from Brink and the necessary 7-pin electrical kit. Perfectly matched to your AUDI A7 Sportback, this towbar and electrical kit were developed for you to tow a trailer of up to 2500 kg. The ball head can be simply removed and stored in the boot when it is not required.

It is not necessary to subject your AUDI A7 Sportback to an expert inspection or to make an entry in your vehicle documentation. The instructions in your vehicle user manual, issued by the vehicle manufacturer, must be complied with.

From the smallest screw to the installation instructions, this complete set provides you with everything you need to install the towbar on your AUDI A7 Sportback.

scroll to start of page

matching accessory for Brink Towbar detachable incl. electrical set 7pins specific (1)

Rameder uses cookies to provide you with the best possible service. If you continue to surf the online shop, you agree to the use of cookies. Learn more in the privacy policy.

OK, I agree