137,000 products always in stock

Brink Towbar rigid incl. electrical set 7pins specific - AUDI A5 Convertible

Product number: 177104-08030-1

Brink
Brink Towbar rigid incl. electrical set 7pins specific

zoom

  • Towbar variant: with screwed-on ball head
  • Towing capacity: 2100 kg
  • Vertical load: 90 kg
  • Electrical set-model: Data bus
  • suitable for AUDI A5 Convertible
  • year of make 03.09 - 12.13

in stock

RRP* 439.-

-30%

307.-

incl. 16% VAT plus shipping costs
* Recommended Retail Price

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
  • You can get in touch with us and we can check whether your vehicle is appropriately set up, please have your chassis number available for this purpose.
Trailer Hitch for vehicles with towbar preparation
Model exclusion S-Line, S5
Datasheet towbar complete kit
Manufacturer towbar Brink
Towbar type rigid
Towbar variant with screwed-on ball head
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vehicle-specific plug connector Yes
Vertical load 1) 90 kg
Towing capacity 2) 2.100 kg
D-value 11,00 kN
Ball head lockable not lockable
Certification E11*94/20*7020*00
Bumper alteration neccessary Yes
Alteration in visible area with visible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in No
Suitable for bike carrier Yes
Weight 18,37 kg
Installation time (in hours) 3) 3,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes
Voltage [V] 12

1)

2)

3) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
  • You can get in touch with us and we can check whether your vehicle is appropriately set up, please have your chassis number available for this purpose.
Trailer Hitch for vehicles with towbar preparation
Model exclusion S-Line, S5
Datasheet towbar complete kit
Manufacturer towbar Brink
Towbar type rigid
Towbar variant with screwed-on ball head
Electrical set-version 7pins
Electrical set type specific
Electrical set-model Data bus
Vehicle-specific plug connector Yes
Vertical load 1) 90 kg
Towing capacity 2) 2.100 kg
D-value 11,00 kN
Ball head lockable not lockable
Certification E11*94/20*7020*00
Bumper alteration neccessary Yes
Alteration in visible area with visible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in No
Suitable for bike carrier Yes
Weight 18,37 kg
Installation time (in hours) 3) 3,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 No
Constant current extendable No
Integrated charge line, pole 10 No
Charge line extendable No
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes
Voltage [V] 12

1)

2)

3) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.


Product details

Complete rigid towbar set with 7-pin electrical kit for your selected vehicle AUDI A5 Convertible

You will be perfectly equipped for all challenges with this complete set, comprising a rigid towbar by Brink and the necessary 7-pin electrical kit. Perfectly matched to your AUDI A5 Convertible, this towbar and electrical kit were developed for you to tow a trailer of up to 2100 kg.

The vehicle does not need to be inspected by an expert after the complete set has been installed. There is also no need for an entry in the vehicle documentation of your AUDI A5 Convertible . Please note the instructions of the vehicle manufacturer in your vehicle user manual. It is possible that the parking assist sensors of the car detect the tow ball. In reverse the towbar could be recognized as an obstacle. If your vehicle has a parking assistance system, we recommend that you install a detachable towbar.

This complete set provides you with everything you need, from the smallest screw to the installation instructions, to install the towbar on your AUDI A5 Convertible.

scroll to start of page

matching accessory for Brink Towbar rigid incl. electrical set 7pins specific (1)

Rameder uses cookies to provide you with the best possible service. If you continue to surf the online shop, you agree to the use of cookies. Learn more in the privacy policy.

OK, I agree