137,000 products always in stock

Westfalia Towbar detachable incl. electrical set 13pins specific + adapter - AUDI A4 Avant

Product number: 117924-06988-2

Westfalia
Westfalia Towbar detachable incl. electrical set 13pins specific + adapter

zoom

Towbar variant: Towball inserted from below
Towing capacity: 2000 kg
Vertical load: 80kg
Electrical set-model: Data bus
  • suitable for AUDI A4 Avant
  • year of make 04.08 - 12.13

in stock

RRP* 715.19

-34%

471.-

incl. 19% VAT plus shipping costs
* Recommended Retail Price

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • Vehicles up to model year 2013 with Audi PR code "1D8" have a prepared 12x connector, we can check which PR code your vehicle has with the help of the chassis number.
  • for S-Line models it is necessary to order a socket holder which can be found under "Matching accessories"
Trailer Hitch for vehicles with towbar preparation
Datasheet towbar complete kit
Manufacturer towbar Westfalia
Towbar type detachable
Towbar lock Automatic
Towbar variant Towball inserted from below
Electrical set-version 13pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 80 kg
Towing capacity 2.000 kg
D-value 11,00 kN
Certification E13*94/20*2244*00
Ball head lockable lockable
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 19,92 kg
Installation time (in hours) 1) 3,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 Yes
Integrated charge line, pole 10 Yes
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.

Special features
  • it is possible that the engine cooling system of the vehicle is not equipped for operation of a trailer; in such cases it may be necessary to replace parts of the cooling system (e.g. fans)
  • if the vehicle is pre-equipped for the AHK, there will be an open 12-pin connector (in the boot behind the right-hand side panel)
  • we will be happy to to help you check whether your vehicle is adequately equipped. Please contact us and have your chassis number on hand
  • Vehicles up to model year 2013 with Audi PR code "1D8" have a prepared 12x connector, we can check which PR code your vehicle has with the help of the chassis number.
  • for S-Line models it is necessary to order a socket holder which can be found under "Matching accessories"
Trailer Hitch for vehicles with towbar preparation
Datasheet towbar complete kit
Manufacturer towbar Westfalia
Towbar type detachable
Towbar lock Automatic
Towbar variant Towball inserted from below
Electrical set-version 13pins
Electrical set type specific
Electrical set-model Data bus
Vertical load 80 kg
Towing capacity 2.000 kg
D-value 11,00 kN
Certification E13*94/20*2244*00
Ball head lockable lockable
Bumper alteration neccessary Yes
Alteration in visible area with invisible bumper cut
Bumper replaceable / cutout can be covered No
Bumper cover included in scope of supply No
Socket holder can be folded in Yes
Suitable for bike carrier Yes
Weight 19,92 kg
Installation time (in hours) 1) 3,0 h
C2 to block light No
Validation required Yes
Parctronic disconnection Yes
Rear fog lamp disconnection Yes
Integrated constant current, pole 9 Yes
Integrated charge line, pole 10 Yes
Preassembled socket No
Installation only on the rear of the vehicle Yes
Cable gland present in vehicle Yes

1) The indicated fitting times for towbars and wiring kits are related to the regular installation of these products. Some car models might require additional work like disassembling the bumper.


Product details

Complete detachable towbar set with 13-pin electrical kit for your AUDI A4 Avant

Your vehicle will be optimally equipped to meet all challenges with this complete set, comprising a detachable towbar by Westfalia, the necessary 13-pin electrical kit, and an adapter. The electrical kit and towbar were developed specifically for your AUDI A4 Avant. With a 80 kg vertical load, this complete set is suitable for both the transport of bicycles with one of our bike carriers and to tow a trailer up to 2000 kg. The ball head can be easily removed and stored in the boot when not in use.

It is not necessary to subject your AUDI A4 Avant to an expert inspection or to make an entry in your vehicle documentation. The instructions of the vehicle manufacturer in your vehicle user manual must be complied with.

This complete set provides you with everything you need, from the smallest screw to the installation instructions, to install the towbar on your AUDI A4 Avant.

scroll to start of page

matching accessory for Westfalia Towbar detachable incl. electrical set 13pins specific + adapter (3)

On this website, cookies are used to permit user-friendly design of the internet presence and optimum tailoring to your requirements, to carry out measurements of reach, to evaluate website visits for purposes of marketing and improvement and to display appropriate content and advertising. You will find details about the cookies used and the option to refuse them in our data protection notice.
By using our website you give your consent to the use of cookies.

Display notice