AUTO-HAK Towbar rigid incl. TowTec electrical set 7pins specific - CUPRA FORMENTOR
AUTO-HAK Towbar rigid incl. TowTec electrical set 7pins specific - CUPRA FORMENTOR
- Towbar variant: with screwed-on ball head
- Towing capacity: 2200 kg
- Vertical load: 110 kg
- Electrical set-model: Data bus
- suitable for CUPRA FORMENTOR
- year of make 08.23 -
.png){kind=icon}
- 99 % positive reviews
- top quality
- quick delivery
- first rate advice
- for vehicles without preparation (PR code 1D0) and for vehicles with two plugs, behind the right-hand side cladding in the car boot (PR code 1M7)
- Model exclusion: VZ, VZ5
- If coding is possible, however, there is the option to switch the electrical set to active mode at the touch of a button and then to code it so that the assistance systems are automatically switched off during towbar operation.
- The electrical set is delivered in passive mode. The assistance systems on the vehicle are not switched off in this case and coding is not required.
Complete towbar set for your CUPRA FORMENTOR: rigid with a 7-pin electrical kit
Consisting of a rigid towbar by AUTO-HAK and the necessary 7-pin electrical kit, this complete set optimally equips your vehicle to meet all challenges. The electrical kit and towbar were developed specifically for your CUPRA FORMENTOR. Trailers with a weight of up to 2200 kg can be towed with them.
The vehicle does not need to be inspected by an expert after the complete set has been installed. There is also no need for an entry in the vehicle documentation of your CUPRA FORMENTOR . The instructions of the vehicle manufacturer in your vehicle user manual must be complied with. Your car's parking assistance sensors might detect the tow ball of this rigid towbar. If the ball head is in the detection area, it will be seen as an obstacle when reversing. We recommend fitting a detachable towbar in vehicles with parking sensors.
This complete set provides you with everything you need, from the smallest screw to the installation instructions, to install the towbar on your CUPRA FORMENTOR.
Installation instructions are given here in different languages and, depending upon the product, complementary installation help and additional images which make the installation or attachment of the product easier for you.
At this point you have the option of documenting your opinions and experiences about this product. In this way, you provide other interested parties with valuable information when making a purchase.
-
Cupra FORMENTOR (KM7, KMP)
-
Vehicle modelPowerYear of make
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 1.4 e-Hybrid
- Power
- 150 kW / 204 HP
- Year of make
- 01.21 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 1.5 TSI
- Power
- 110 kW / 150 HP
- Year of make
- 11.20 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 2.0 TDI
- Power
- 110 kW / 150 HP
- Year of make
- 03.21 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 2.0 TDI 4Drive
- Power
- 110 kW / 150 HP
- Year of make
- 03.21 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 2.0 TSI
- Power
- 140 kW / 190 HP
- Year of make
- 01.21 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 2.0 TSI
- Power
- 180 kW / 245 HP
- Year of make
- 03.21 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 2.0 TSI 4Drive
- Power
- 140 kW / 190 HP
- Year of make
- 08.20 -
-
- Vehicle model
- Cupra FORMENTOR (KM7, KMP) 2.0 TSI 4Drive
- Power
- 228 kW / 310 HP
- Year of make
- 07.20 -
-
Safe and transparent: GPSR-compliant manufacturer information. In accordance with the new EU GPSR regulation, you will find all essential information about the manufacturer of this product here. This includes contact details that provide you with direct access to the manufacturer in case of questions or issues. It is important to us that you, as a customer, can access all relevant information at any time.
- Auto-Hak Sp. z o.o.
- ul.Sloneczna 16K
- 76-200 Slupsk
- Województwo pomorskie
- Poland
- BoldR Group GmbH
- Am Eichberg Flauer 1
- 07338 Leutenberg / OT Munschwitz
- Thuringia
- Germany